Custom DJ Slem Chain & Pendant

Name: Custom DJ Slem Chain & Pendant
Brand: emirice.com
Price: 2800.00 EUR
Availability: InStock

2,800.00€

Materials

S925 + VVS1 Moissanite sold out

Qty

+Détails du produit

This is the payment link for the creation of your custom pendant.

Production takes an average of 3-4 weeks.

Hip Hop jewelry online store @emirice24k on social media!

Materials: 925 Silver + VVS1 Moissanite (handcrafted)

Dimension 2.5 inches

How an Emir ICE custom creation works

This page is a dedicated payment link: it validates a piece already defined with the workshop. Therefore, it has no variants to compose and no stock, unlike a men's pendant necklace from the catalog. The elements below reiterate what is indicated above and answer the most frequently asked questions about custom orders.

What this page specifies

Materials: 925 Silver and VVS1 moissanite, handcrafted.
Dimension: 2.5 inches, or about 6.3 cm.
Lead time: 3 to 4 weeks on average for production.

No other characteristics are asserted here: the exact detail of your piece is what was agreed upon with the workshop before the order.

Moissanite: what you need to know

Moissanite is a stone in its own right, distinct from diamond. Its brilliance and fire are very high, to the point that it passes common diamond testers, but it is not a diamond. It is a deliberate choice for custom pieces: it allows for a volume of stones impossible to achieve otherwise, on a 925 silver base.

What chain length for a custom piece

A 2.5-inch pendant is a bold format: it benefits from hanging low enough to breathe. The usual benchmarks:

50 cm: the pendant rests at the top of the sternum. Suitable if you wear it under an open jacket.
55 cm: the design hangs in the middle of the chest, with more movement.
60 cm: the low streetwear style, over a sweatshirt. The most common size for a large piece.
925 silver men's chain remains the most consistent support for a silver base, both for the color and the weight.

A 925 silver men's chain remains the most coherent support for a silver base, both for the shade and for the weight.

Wearing and caring for a workshop piece

Handcrafted items require a little more attention than mass-produced pieces: the prongs are set one by one and do not handle impact well. Wear it alone rather than layered, and avoid sliding it under a stiff collar. Like any men's silver pendant necklace, it will tarnish in contact with air: wiping it with a soft cloth after each wear is enough to revive it.

Daily care

Remove the necklace before showering, swimming, or exercising: chlorinated water and sweat wear down all finishes.
Apply perfume and lotion before putting on the jewelry, never after.
Wipe it with a soft, dry cloth after each wear.
Store it flat, in its case or an individual pouch, to prevent the links from tangling.
Avoid household products, alcohol, and abrasive pastes.

Frequently asked questions

Can I order from this page without having consulted the workshop?

No: this is a payment link corresponding to a project already defined. To start a new creation, please visit our custom jewelry collection.

How long does it take?

3 to 4 weeks on average, as indicated above. Handcrafting cannot be rushed: stone-by-stone setting accounts for most of the lead time.

Does moissanite scratch?

It is a very hard stone, but no stone is unbreakable. Avoid direct impact and prolonged contact with other jewelry in the same pouch.

Discover our custom personalized jewelry, our pendants, and our diamond moissanite jewelry.

+Garantie et livraison

Delivery in Metropolitan France

Colissimo tracked in 2-5 business days, free on orders over €25.

Western Europe, United Kingdom, USA, Canada

Chronopost in 3-5 business days.

Delivery to Overseas Territories (DOM-TOM)

Colissimo in 5-12 business days (Réunion: 11-18 business days).

Africa and other destinations

Colissimo in 6-15 business days.

In-stock items shipped within 24 to 48 business hours. Personalized jewelry: 1 to 4 weeks production time; custom-made: 3 to 8 weeks.

Returns

14 days after receipt to change your mind, no justification required (terms and exceptions).

Warranties

Legal conformity guarantee: 2 years from delivery. Emir ICE commercial warranty: 1 year against material and manufacturing defects.

100% Secure Payment

Our SSL protocol guarantees a secure transaction by Credit card or Apple Pay.

+Guide des tailles

SIZE GUIDES: CHAINS / NECKLACES

SIZE GUIDE: BRACELETS / BOURMETTES

SIZE GUIDE: RINGS

To know your ring size, you need to measure the circumference of your finger or the diameter of a ring you usually wear.

Measure the circumference of your finger

Take a tape measure or a piece of paper, wrap it around your finger, mark the limits and transfer the measurement to a graduated ruler to know the circumference.

In this table you will find the correspondence between ring size and finger circumference (in cm):

Ring size	Finger circumference in cm
5	4.9
	5
	5.1
6	5.2
	5.3
7	5.4
	5.5
	5.6
8	5.7
	5.8
9	5.9
	6
	6.1
10	6.2
	6.3
11	6.4
	6.5
	6.6
12	6.7
	6.8
	6.9
	7
13	7.1

Measuring the diameter of a ring

You can also measure the diameter of one of your rings with a ruler. Place the ruler on your ring and measure the space between its inner edges and the center of the ring. This method is the most accurate.

ring size guide 2

SIZE GUIDE: WATCHES

Watch sizing is generally adjustable. Here are the steps to follow to adjust your watch strap to fit your wrist.

1 - Step One - Measure the Watch Strap : To know how many links to remove, wear your watch strap on your wrist as you would like to wear it, then hold the loose portion of the excess strap to pretend they are being removed. The dangling links will tell you how many links you will need to remove first.

Take note! Try to remove the same number of links from each side of the watch to ensure the clasp remains in the center of the bracelet.

2 - Gather your tools. You will need tools to remove the links from your watch:

A thin, pointed rod or drift.
Long-nose pliers.
A small hammer.

3 - Prepare your work environment. Work in a clutter-free workspace to avoid possible loss of workpieces.

4 - Choose the stitch you need to remove. Use your pin punch to push the pin that holds the stitch you are going to remove.

Push the pin in a few millimeters and remove it from the bracket on the reverse side using your pliers or your hands.
Place the pin in your tool holder, you will need it later to put the band back in place.

5 - Reassemble the watch strap. After removing all the links you wanted, you'll put the pins back into the strap to finish the job. Here's how:

Place the pins back in the middle of the stitches you want to connect and make sure you insert them into the holes at the same time.
You can also lightly tap the pins using a small hammer.

6 - Try on your watch. Your watch should now be the right size for your wrist if you have removed the correct number of links. If you still find it too big, remove more links.

Keep any excess stitches, pins, and metal rings, as you may need them later.

Paiement en 3× sans frais

Expédition sous 24–48h

Service client 7 jours/7