Pendentif chiffre 0 diamant moissanite

SIZE GUIDE: BRACELETS / BOURMETTES

SIZE GUIDE: RINGS

SIZE GUIDE: WATCHES

Watch sizing is generally adjustable. Here are the steps to follow to adjust your watch strap to fit your wrist.

1 - Step One - Measure the Watch Strap : To know how many links to remove, wear your watch strap on your wrist as you would like to wear it, then hold the loose portion of the excess strap to pretend they are being removed. The dangling links will tell you how many links you will need to remove first.

• Take note! Try to remove the same number of links from each side of the watch to ensure the clasp remains in the center of the bracelet.

2 - Gather your tools. You will need tools to remove the links from your watch:

• A thin, pointed rod or drift.
• Long-nose pliers.
• A small hammer.

3 - Prepare your work environment. Work in a clutter-free workspace to avoid possible loss of workpieces.

4 - Choose the stitch you need to remove. Use your pin punch to push the pin that holds the stitch you are going to remove.

• Push the pin in a few millimeters and remove it from the bracket on the reverse side using your pliers or your hands.
• Place the pin in your tool holder, you will need it later to put the band back in place.

5 - Reassemble the watch strap. After removing all the links you wanted, you'll put the pins back into the strap to finish the job. Here's how:

• Place the pins back in the middle of the stitches you want to connect and make sure you insert them into the holes at the same time.
• You can also lightly tap the pins using a small hammer.

6 - Try on your watch. Your watch should now be the right size for your wrist if you have removed the correct number of links. If you still find it too big, remove more links.

• Keep any excess stitches, pins, and metal rings, as you may need them later.